ToolGrip SK

The ToolGrip SK tool gripper are an approved serial product for automatic tool changing. They are clamping tools with ISO taper and pull stud acc. DIN 69871/72. The six-piece clamping segments have an optimal load balancing. Therefore a higher permitted clamping force is possible. And this at faster cyles.

On request all tool grippers are available in wear-resistant coated design. Please contact us!

With pleasure we modify the tool grippers according to your application.
For example:

 

  • Reinforced design for higher clamping forces
  • Design with varying clamping stroke
  • Design with additional sealings
  • Design with air blast / coolant / minimal quantity lubrication delivery

 

 Download catalog section

MultiGrip SK

The MultiGrip SK tool gripper are clamping tools with ISO taper tools and pull stud acc. DIN 69871/72. It is possible to use tools with other pull studs with same connection dimensions in the same spindle internal contour by simply changing the tool gripper.

Following pull studs are possible:

 

  • DIN 69871/72
  • ISO 7388/1+2 (A/B)
  • ANSI B5.50
  • MAS-BT JIS B6339-1992

 

With pleasure we modify the tool grippers according to your application.

For example:

 

  • Reinforced design for higher clamping forces
  • Design with varying clamping stroke
  • Design with additional sealings
  • Design with air blast / coolant / minimal quantity lubrication delivery

 

 Download catalog section

UniGrip SK

The UniGrip SK tool gripper are clamping tools with ISO taper tools and pull stud acc. DIN 69871/72. The six-piece clamping segments have an optimal load balancing. Therefore a higher permitted clamping force is possible. And this at faster cycles. On request all tool grippers are available in wear-resistant coated design. Please contact us! It is possible to use tools with other pull studs with same connection dimensions in the same spindle internal contour by simply changing the tool gripper.
Following pull studs are possible:

 

  • DIN 69871/72
  • ISO 7388/1+2 (A/B)
  • ANSI B5.50
  • MAS-BT JIS B6339-1992

 

With pleasure we modify the tool grippers according to your application.
For example:

 

  • Reinforced design for higher clamping forces
  • Design with varying clamping stroke
  • Design with additional sealings
  • Design with air blast / coolant / minimal quantity lubrication delivery

 

 Download catalog section

We look forward to hearing from you.

Do you have questions about our products or would you like personal consultation?
You can find the right Ortlieb contact person for you here.

Go to contact persons Catalog order