QUADRO® Dead Length Collet Chucks
The main range of application of the QUADRO® dead length collet chucks are NC/CNC-machines, lathes, special machines etc.
The clamping pressure is hydraulically transferred by a pressure tube on the pressure sleeve.
The high qualitystandard and the universal range of application are the reasons that QUADRO® dead length collets are counting to the first class products in the clamping technology.
On request we are modifying the dead length collet chucks according to your special clamping application.
Of course we are pleased to produce the adapter for your machine. Just email or fax us the spindle dimensions.
You can also make the connection adapter yourself.
QUADRO®
clamping chuck
for NC/CNC machines, turning and special machines as well as numerous other applications.
No axial offset of the workpieces as tension under pressure
Both Rubber-Flex® RFC collets and clamping chucks according to DIN 6343 can be used.
Short changeover times for collet replacement due to bayonet lock
Conversion to dual voltage with Rubber-Flex® RFC clamping collets for vibration-free clamping possible
QUADRO®
Reduction Parts for Standard Chucks
The reduction parts allow the use of smaller Rubber-Flex® RFC or steel collets DIN 6343 in the same main body of the chuck.
For that modification you need pressure sleeve and bayonet lock nut.
Two Rubber-Flex® RFC 36 or RFC 52 in series guarantee largely vibration-free clamping of bar stock.
The clamping length is 90 or 110 mm
This clamping option is recommended with increasing bar diameter.
