Modular. For all applications. On any machine.

This compact chucking system can be used on turning, grinding, milling and indexing table machines. You can compose the individual chuck components
as required due to the modularity of the system. All you need is the maximum work piece diameter and the size of the spindle nose of your machine.
The appropriate adapter can be manufactured by yourself. Of course we are pleased to produce the adapter for your machine. Just send us the spindle
dimensions or fax the filled-out form.

The pull-down chucks are available in the following design:

  • Through hole chuck for bar machining
  • Endstop chuck with removable endstop for insert parts and bar processing
  • DL-chuck with removable endstop for position-neutral clamping of insert parts and barmaterial
  • Machine specific special solutions on request


Your benefit:

  • Safe clamping by constant clamping force also at increasing rotational speed
  • High rigidity by parallel clamping of clamping heads
  • Increased flexibility of your production machine due to large clamping range
  • Extension of working space due to compact design and reduction of interfering edges

SPANNAX® SlimLine Through Hole Chuck

Even more compact and lighter for barmaterial machining on main-spindel

 

Your benefit:

  • Considerable reduced measures and torque of inertia thereby
    spindle preserving
  • Considerable reduced interfering edges thereby increased
    accessibility of workpiece
  • Increased runout up to 0.005 mm due to one-piece chuck body
  • Higher revolution speed up to 8000 rpm (size 42 & 65)
  • Extreme setting friendly and service reduced, ­completely sealed

 

 Download catalog section

SPANNAX® Through Hole Chuck

Ideal for barmaterial machining on main-spindle

 

Your benefit:

  • Extension of working space due to compact design and
    reduction of interfering edges
  • Spindle preserving by small centrifugal force
  • High clamping force

 

 Download catalog section

SPANNAX® Endstop Chuck with
Full Passage (removable endstop)

Ideal for processing of insert parts and barmaterial on mainspindle

 

Your benefit:

  • Highest axial reference of workpieces due to axial pull-back
    movement on endstop
  • Spindle preserving by small centrifugal force
  • Short changeover time from endstop to through hole by quick
    changeable endstop

 

 Download catalog section

SPANNAX® DL-Dead Length Chuck "Combi"

Ideal for processing of insert parts and barmaterial on main and sub-spindle

 

Your benefit:

  • Extension of working space due to compact design and reduction of interfering edges
  • Spindle preserving by small centrifugal force and axial-force free clamping
  • Short changeover time from endstop chuck to through hole chuck by quick-changeable endstop

 

 Download catalog section

Accessories

Changing Devices – manually or pneumatic – are required to replace the chucks.

 

Your benefit:

  • Easy to use thanks to centric power transmission
  • Robust and modern design

 

 Download catalog section

We look forward to hearing from you.

Do you have questions about our products or would you like personal consultation?
You can find the right Ortlieb contact person for you here.

Go to contact persons Catalog order