Cone Expanding Mandrel CenterGrip

The cone expanding mandrel CenterGrip is designed without a draw bolt. Therefore it is also possible to clamp the whole length of blind holes.

The 6-segmented sleeves (CG30 = 3 segments) are based on the reliable Rubber-Flex® vulcanising technology and offers a maximum clamping length of 51.5 mm with 1 mm increments of the clamping diameter. Other clamping ­diameters and contours on request.

 

 Download catalog section

 Download catalog section fitting dimension

Cone Expanding Mandrel KSD 45/100

The cone expanding mandrels KSD are particularly suitable for internal clamping of short workpieces up to a clamping-Ø 100 mm and this with outstanding runout characteristics. The components can be easily combined and the system can be mounted horizontal as well as vertical on usual motorspindles.

The sleeves are double-sided slitted and allow a faultlessly cylindrical clamping. The length endstops are delivered in soft rough-turned version in order to enable you to modify them to the suitable length.

 

 Download catalog section

We look forward to hearing from you.

Do you have questions about our products or would you like personal consultation?
You can find the right Ortlieb contact person for you here.

Go to contact persons Catalog order